How to Use Your SilentRise™ Alarm Band

Start your mornings your way—calm, quiet, and always on time. Below is the simplest guide to get your SilentRise™ silent vibrating alarm clock fully set up and ready.

1. Turn On & Set the Time

1. Press the button once to turn on SilentRise™.
2. Press and hold the button for 3 seconds until the hour flashes.
3. Press the button to adjust the hour.
4. Press and hold for 3 seconds to move to minutes.
5. Repeat this process to set minutes, month, day, and year.
6. Choose 12-hour or 24-hour format.

Tip: If you stop for 4.5 seconds, SilentRise™ returns to the main screen. Just restart by holding the button for 3 seconds.

2. Enter Height & Weight (for sleep and step tracking)

After setting time and date, SilentRise™ will ask for your height and weight.

• Hold the button until the value flashes.
• Press to adjust.
• Hold again to confirm.

SilentRise™ will auto-save after 8 seconds of no action.

3. Set Your Vibration Alarm

SilentRise™ allows up to two vibration alarms.

Alarm 1 Setup

1. Press the button 5 times to reach Alarm 1.
2. If you see A1 OF, the alarm is off.
3. Hold the button for 3 seconds to start setting.
4. Adjust the hour → hold for 3 sec → adjust minutes → hold to save.
5. Alarm is now active and repeats daily.

Alarm 2 Setup

• Press the button 6 or 7 times to access Alarm 2.
• Repeat the same process.

4. Turn an Alarm Off

1. Navigate to the alarm (A1 / A2).
2. Hold the button for 3 seconds.
3. Tap until you see A1 OF or A2 OF.
4. Hold for 3 seconds to confirm.
5. 5. Check Battery Level

• Hold the button for 3 seconds while SilentRise™ is idle.
• Battery percentage will appear.

Charge via any USB 2.0 port—laptop, power bank, or charger.